Technical Specifications
| Brand | Audi |
| Model | A4 |
| Generation | A4 (B8 8K, facelift 2011) |
| Type (Engine) | 2.0 TDI (136 Hp) |
| Start of production | 2011 |
| End of production | 2015 |
| Powertrain Architecture | Internal Combustion engine |
| Body type | Sedan |
| Seats | 5 |
| Doors | 4 |
| Fuel consumption (urban) | 5.4 l/100 km (43.6 US mpg, 52.3 UK mpg, 18.5 km/l) |
| Fuel consumption (extra urban) | 3.9 l/100 km (60.3 US mpg, 72.4 UK mpg, 25.6 km/l) |
| Fuel consumption (combined) | 4.5 l/100 km (52.3 US mpg, 62.8 UK mpg, 22.2 km/l) |
| CO2 emissions | 117 g/km |
| Fuel Type | Diesel |
| Acceleration 0 – 100 km/h | 9.3 sec |
| Acceleration 0 – 62 mph | 9.3 sec |
| Acceleration 0 – 60 mph | 8.8 sec |
| Maximum speed | 215 km/h (133.59 mph) |
| Emission standard | Euro 5 |
| Weight-to-power ratio | 10.9 kg/Hp, 91.9 Hp/tonne |
| Weight-to-torque ratio | 4.6 kg/Nm, 216.2 Nm/tonne |
| Power | 136 Hp @ 4200 rpm |
| Power per litre | 69.1 Hp/l |
| Torque | 320 Nm @ 1750-2500 rpm (236.02 lb.-ft. @ 1750-2500 rpm) |
| Engine layout | Front, Longitudinal |
| Engine Model/Code | CJCB |
| Engine displacement | 1968 cm3 (120.09 cu. in.) |
| Number of cylinders | 4 |
| Engine configuration | Inline |
| Cylinder Bore | 81 mm (3.19 in.) |
| Piston Stroke | 95.5 mm (3.76 in.) |
| Compression ratio | 16.5:1 |
| Number of valves per cylinder | 4 |
| Fuel injection system | Diesel Commonrail |
| Engine aspiration | Turbocharger, Intercooler |
| Valvetrain | DOHC |
| Engine oil capacity | 5 l (5.28 US qt | 4.4 UK qt) |
| Kerb Weight | 1480 kg (3262.84 lbs.) |
| Max. weight | 2030 kg (4475.38 lbs.) |
| Max load | 550 kg (1212.54 lbs.) |
| Trunk (boot) space – minimum | 480 l (16.95 cu. ft.) |
| Trunk (boot) space – maximum | 962 l (33.97 cu. ft.) |
| Fuel tank capacity | 63 l (16.64 US gal | 13.86 UK gal) |
| Max. roof load | 90 kg (198.42 lbs.) |
| Permitted trailer load with brakes (8%) | 1500 kg (3306.93 lbs.) |
| Permitted trailer load with brakes (12%) | 1300 kg (2866.01 lbs.) |
| Permitted trailer load without brakes | 750 kg (1653.47 lbs.) |
| Permitted towbar download | 80 kg (176.37 lbs.) |
| Length | 4701 mm (185.08 in.) |
| Width | 1826 mm (71.89 in.) |
| Width including mirrors | 2040 mm (80.31 in.) |
| Height | 1427 mm (56.18 in.) |
| Wheelbase | 2808 mm (110.55 in.) |
| Front track | 1564 mm (61.57 in.) |
| Rear (Back) track | 1551 mm (61.06 in.) |
| Front overhang | 862 mm (33.94 in.) |
| Rear overhang | 1031 mm (40.59 in.) |
| Drag coefficient (Cd) | 0.26 |
| Minimum turning circle (turning diameter) | 11.5 m (37.73 ft.) |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the front wheels of the vehicle. |
| Drive wheel | Front wheel drive |
| Number of gears and type of gearbox | 6 gears, manual transmission |
| Front suspension | Independent multi-link suspension |
| Rear suspension | Independent on trapezoidal lever |
| Front brakes | Ventilated discs |
| Rear brakes | Disc |
| Assisting systems | ABS (Anti-lock braking system) |
| Steering type | Steering rack and pinion |
| Power steering | Electric Steering |
| Tires size | 225/55 R16 |
| Wheel rims size | 7.5J x 16 |
The Audi A4 (B8 8K) facelift, produced from 2011 to 2015, was a significant refresh of Audi’s popular compact executive car. The 2.0 TDI variant, producing 136 horsepower, was a key offering, particularly in European markets. This model aimed to balance fuel efficiency with acceptable performance, serving as a practical and economical choice for both private buyers and company car fleets. It occupied a middle ground in the A4 lineup, positioned below the more powerful TDI variants and the petrol-fueled models, but above the entry-level engine options. The B8 facelift brought subtle styling changes, improved interior materials, and updated technology compared to the pre-facelift models.
Powertrain & Engine Architecture
The heart of this A4 variant is the 2.0-liter four-cylinder diesel engine, specifically the CJCB engine code. This engine is a member of the Volkswagen Group’s modular engine family, known for its robust design and widespread use across various brands. The CJCB utilizes a common rail direct injection system, delivering fuel at extremely high pressures for optimized combustion. A turbocharger with an intercooler is employed to boost power output and improve efficiency. The engine features a double overhead camshaft (DOHC) valvetrain with four valves per cylinder, enhancing breathing and contributing to its torque curve. The engine’s 16.5:1 compression ratio is typical for a diesel engine, aiding in efficient combustion. A 6-speed manual transmission was standard, offering a balance between fuel economy and driver engagement. While an automatic transmission (typically a Multitronic CVT) was available as an option, this article focuses on the manual configuration.
Driving Characteristics
The 136 horsepower and 320 Nm (236 lb-ft) of torque provided by the 2.0 TDI offered a comfortable and practical driving experience. Acceleration from 0-60 mph took around 8.8 seconds, which was adequate for everyday driving but not particularly sporty. The engine’s peak torque, available from 1750-2500 rpm, meant that there was ample pulling power for overtaking and navigating hills. Compared to the more powerful TDI variants (like the 177 hp version), this engine felt less stressed and offered better fuel economy. The manual transmission’s gear ratios were well-matched to the engine’s characteristics, providing smooth shifts and efficient power delivery. While not as engaging as a sportier setup, the 2.0 TDI offered a refined and predictable driving experience. The relatively low power output meant that the engine needed to be revved more to achieve brisk acceleration, but it remained smooth and quiet even at higher speeds.
Equipment & Trim Levels
The 2.0 TDI 136 hp model typically came with a respectable level of standard equipment. This included air conditioning, a multi-function steering wheel, electric windows, and an audio system with CD player. Higher trim levels, such as SE and S-line, added features like alloy wheels, upgraded upholstery, parking sensors, and a more sophisticated infotainment system. Optional extras included a sunroof, leather seats, and a navigation system. Interior upholstery was typically cloth, although leather was available as an upgrade. The dashboard layout was typical of Audi’s B8-era design, characterized by a clean and functional aesthetic. S-line models featured sport seats, a sport suspension, and unique exterior styling cues.
Chassis & Braking
The A4 B8 featured a well-engineered chassis designed for comfort and handling. The front suspension utilized an independent multi-link setup, while the rear employed an independent trapezoidal link design. This configuration provided a good balance between ride quality and cornering stability. The 2.0 TDI models typically came equipped with ventilated front disc brakes and solid rear discs. Anti-lock Braking System (ABS) was standard. The suspension tuning was generally geared towards comfort, with a focus on absorbing bumps and providing a smooth ride. Stabilizer bars were fitted to both the front and rear axles to reduce body roll during cornering. The relatively lower weight of the 2.0 TDI compared to the V6 models contributed to its nimble handling.
Market Reception & Comparison
The Audi A4 2.0 TDI 136 hp was well-received in the market, particularly in Europe, where diesel engines were highly popular. Critics praised its fuel efficiency, comfortable ride, and refined interior. Compared to its rivals, such as the BMW 320d and Mercedes-Benz C220 CDI, the A4 offered a compelling combination of practicality, performance, and build quality. The 2.0 TDI was generally considered more economical than the higher-output TDI variants, making it an attractive option for drivers prioritizing fuel savings. However, some critics noted that it lacked the outright performance of its more powerful siblings. The 1.8 TFSI petrol engine offered a similar price point but lacked the fuel economy of the diesel.
Legacy
The CJCB engine, found in this A4 variant, has proven to be a relatively reliable unit when properly maintained. Common issues include diesel particulate filter (DPF) clogging, particularly on vehicles used primarily for short journeys, and potential problems with the turbocharger. However, these issues are not uncommon for modern diesel engines. Today, the A4 B8 2.0 TDI 136 hp remains a popular choice in the used car market, offering a good balance of affordability, fuel efficiency, and practicality. Its reputation for reliability and relatively low running costs makes it an appealing option for buyers seeking a comfortable and economical compact executive car. The availability of parts and a well-established network of mechanics further contribute to its enduring appeal.



