2013-2017 Ford Fiesta VII (Mk7 facelift ) 5 door 1.0 (65 Hp)

The Ford Fiesta VII, specifically the facelifted model produced from 2013 to 2017, represented a significant evolution of Ford’s popular subcompact hatchback. Within this generation, the 1.0-liter 65 horsepower variant, offered with a five-speed manual transmission, served as the entry point into the Fiesta range. This model was primarily aimed at buyers prioritizing fuel efficiency and affordability, particularly in European markets where smaller displacement engines were favored due to taxation and fuel costs. It occupied the base trim level, offering essential features while providing a practical and economical transportation solution.

Technical Specifications

Brand Ford
Model Fiesta
Generation Fiesta VII (Mk7, facelift 2013) 5 door
Type (Engine) 1.0 (65 Hp)
Start of production 2013
End of production 2017
Powertrain Architecture Internal Combustion engine
Body type Hatchback
Seats 5
Doors 5
Fuel consumption (urban) 5.1 l/100 km (46.1 US mpg, 55.4 UK mpg, 19.6 km/l)
Fuel consumption (extra urban) 3.8 l/100 km (61.9 US mpg, 74.3 UK mpg, 26.3 km/l)
Fuel consumption (combined) 4.3 l/100 km (54.7 US mpg, 65.7 UK mpg, 23.3 km/l)
CO2 emissions 99 g/km
Fuel Type Petrol (Gasoline)
Acceleration 0 – 100 km/h 16.8 sec
Acceleration 0 – 62 mph 16.8 sec
Acceleration 0 – 60 mph 16 sec
Maximum speed 155 km/h (96.31 mph)
Emission standard Euro 5
Weight-to-power ratio 14.9 kg/Hp, 67 Hp/tonne
Weight-to-torque ratio 9.2 kg/Nm, 108.2 Nm/tonne
Power 65 Hp @ 4500-6300 rpm
Power per litre 65.1 Hp/l
Torque 105 Nm @ 4100 rpm (77.44 lb.-ft. @ 4100 rpm)
Engine layout Front, Transverse
Engine Model/Code XMJD
Engine displacement 998 cm3 (60.9 cu. in.)
Number of cylinders 3
Engine configuration Inline
Number of valves per cylinder 4
Fuel injection system Direct injection
Engine aspiration Turbocharger, Intercooler
Engine oil capacity 4.1 l (4.33 US qt | 3.61 UK qt)
Coolant 5.8 l (6.13 US qt | 5.1 UK qt)
Kerb Weight 970 kg (2138.48 lbs.)
Max. weight 1530 kg (3373.07 lbs.)
Max load 560 kg (1234.59 lbs.)
Trunk (boot) space – minimum 281 l (9.92 cu. ft.)
Trunk (boot) space – maximum 965 l (34.08 cu. ft.)
Fuel tank capacity 42 l (11.1 US gal | 9.24 UK gal)
Permitted trailer load with brakes (8%) 750 kg (1653.47 lbs.)
Permitted trailer load with brakes (12%) 650 kg (1433 lbs.)
Permitted trailer load without brakes 525 kg (1157.43 lbs.)
Length 3969 mm (156.26 in.)
Width 1722 mm (67.8 in.)
Width with mirrors folded 1787 mm (70.35 in.)
Width including mirrors 1973 mm (77.68 in.)
Height 1495 mm (58.86 in.)
Wheelbase 2489 mm (97.99 in.)
Minimum turning circle 10.2 m (33.46 ft.)
Drivetrain Architecture Front wheel drive
Number of gears and type of gearbox 5 gears, manual transmission
Front suspension Independent, type McPherson with coil spring and anti-roll bar
Rear suspension Coil spring, Torsion
Front brakes Ventilated discs
Rear brakes Drum
Assisting systems ABS (Anti-lock braking system)
Steering type Steering rack and pinion
Power steering Electric Steering
Tires size 175/65 R14; 195/55 R15
Wheel rims size 5.5J x 14; 6J x 15

Powertrain & Engine Architecture

The heart of this Fiesta variant is the 998cc ‘EcoBoost’ three-cylinder engine, designated XMJD. This engine utilized a combination of direct fuel injection and a turbocharger with an intercooler to deliver a reasonable level of performance from its small displacement. The engine’s architecture featured a lightweight aluminum block and cylinder head, contributing to overall vehicle efficiency. The direct injection system allowed for precise fuel delivery, optimizing combustion and reducing emissions. The engine employed a timing belt to drive the camshaft, a component requiring periodic replacement as part of scheduled maintenance. The five-speed manual transmission was chosen for its simplicity and cost-effectiveness, providing a direct connection between the engine and the front wheels.

Driving Characteristics

The 65 horsepower output of this Fiesta resulted in modest acceleration. The 0-60 mph time of around 16 seconds reflects its focus on economy rather than outright speed. However, the turbocharger did provide a noticeable boost in power at higher engine speeds, making overtaking maneuvers possible, albeit requiring careful planning. The gear ratios were tuned for fuel efficiency, with taller gearing in the upper gears. This meant that the engine could comfortably cruise at highway speeds, but required downshifting for quicker acceleration. Compared to higher-output Fiesta variants, such as those equipped with the 1.0-liter 125 hp engine, this version felt noticeably slower, but offered a more relaxed and economical driving experience.

Equipment & Trim Levels

The base-level Fiesta 1.0 65 hp typically came equipped with essential features such as power steering, ABS, front airbags, and a basic audio system. Air conditioning was often an optional extra. Interior upholstery was typically cloth, with a functional but basic dashboard layout. Higher trim levels added features like alloy wheels, upgraded audio systems, and more sophisticated interior trim. The focus of this variant was on providing a practical and affordable package, with buyers often opting for air conditioning and perhaps an upgraded audio system as key extras.

Chassis & Braking

The Fiesta VII utilized a McPherson strut front suspension and a torsion beam rear suspension. This setup provided a good balance between ride comfort and handling. The front brakes were ventilated discs, offering adequate stopping power, while the rear brakes were drums, a cost-saving measure for the base model. The electric power steering provided light and easy steering, making it ideal for urban driving. Stabilizer bars were fitted to both the front and rear axles to reduce body roll during cornering.

Market Reception & Comparison

The 1.0-liter 65 hp Fiesta was generally well-received by critics as a sensible and economical choice. Its fuel efficiency was a major selling point, and it proved popular with drivers who primarily used the car for commuting or short trips. Compared to the more powerful Fiesta variants, it offered lower running costs but sacrificed performance. The 1.0-liter engine was also praised for its refinement, despite being a three-cylinder unit. Reliability was generally good, although the turbocharger did require regular maintenance to ensure longevity.

Legacy

The 1.0-liter EcoBoost engine, in its various iterations, became a mainstay of the Ford lineup, proving to be a reliable and efficient powerplant. The Fiesta 1.0 65 hp variant remains a popular choice on the used car market, particularly for first-time drivers or those seeking an affordable and economical runabout. While not the most exciting Fiesta variant, it represents a practical and well-engineered solution for everyday transportation. Its continued presence on the roads is a testament to its durability and fuel efficiency.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top