Technical Specifications
| Brand | Audi |
| Model | Q5 |
| Generation | Q5 III (GU) |
| Type (Engine) | 2.0 TFSI (204 Hp) Mild Hybrid plus S tronic |
| Start of production | September, 2024 |
| Powertrain Architecture | MHEV (Mild Hybrid Electric Vehicle) |
| Body type | SUV |
| Seats | 5 |
| Doors | 5 |
| Combined fuel consumption (WLTP) | 6.4-7.3 l/100 km (36.8 – 32.2 US mpg, 44.1 – 38.7 UK mpg, 15.6 – 13.7 km/l) |
| CO2 emissions (WLTP) | 146-165 g/km |
| Fuel Type | Petrol (Gasoline) |
| Acceleration 0 – 100 km/h | 8.6 sec |
| Acceleration 0 – 62 mph | 8.6 sec |
| Acceleration 0 – 60 mph | 8.2 sec |
| Maximum speed | 226 km/h (140.43 mph) |
| Emission standard | Euro 6e |
| Weight-to-power ratio | 9 kg/Hp, 111.2 Hp/tonne |
| Weight-to-torque ratio | 5.4 kg/Nm, 185.3 Nm/tonne |
| Gross battery capacity | 1.7 kWh |
| Battery voltage | 48 V |
| Battery technology | Lithium iron phosphate (LiFePO4) |
| Battery location | Under the trunk |
| Recuperation output | 25 kW |
| Electric motor power | 24 Hp |
| Electric motor Torque | 230 Nm (169.64 lb.-ft.) |
| Electric motor location | Middle, Longitudinal |
| Power | 204 Hp @ 4300-6000 rpm |
| Power per litre | 102.8 Hp/l |
| Torque | 340 Nm @ 2000-4000 rpm (250.77 lb.-ft. @ 2000-4000 rpm) |
| Engine layout | Front, Longitudinal |
| Engine displacement | 1984 cm3 (121.07 cu. in.) |
| Number of cylinders | 4 |
| Engine configuration | Inline |
| Cylinder Bore | 82.5 mm (3.25 in.) |
| Piston Stroke | 92.8 mm (3.65 in.) |
| Compression ratio | 12.5:1 |
| Number of valves per cylinder | 4 |
| Fuel injection system | Direct injection |
| Engine aspiration | Turbocharger, Intercooler |
| Valvetrain | DOHC |
| Engine oil capacity | 6 l (6.34 US qt | 5.28 UK qt) |
| Coolant | 13.4 l (14.16 US qt | 11.79 UK qt) |
| Kerb Weight | 1835 kg (4045.48 lbs.) |
| Max. weight | 2460 kg (5423.37 lbs.) |
| Max load | 625 kg (1377.89 lbs.) |
| Trunk (boot) space – minimum | 520 l (18.36 cu. ft.) |
| Trunk (boot) space – maximum | 1473 l (52.02 cu. ft.) |
| Fuel tank capacity | 65 l (17.17 US gal | 14.3 UK gal) |
| Max. roof load | 75 kg (165.35 lbs.) |
| Permitted trailer load with brakes (8%) | 2000 kg (4409.25 lbs.) |
| Permitted trailer load with brakes (12%) | 2000 kg (4409.25 lbs.) |
| Permitted trailer load without brakes | 750 kg (1653.47 lbs.) |
| Permitted towbar download | 100 kg (220.46 lbs.) |
| Length | 4717 mm (185.71 in.) |
| Width | 1900 mm (74.8 in.) |
| Width including mirrors | 2155 mm (84.84 in.) |
| Height | 1625-1662 mm (63.98 – 65.43 in.) |
| Wheelbase | 2820 mm (111.02 in.) |
| Front track | 1645 mm (64.76 in.) |
| Rear (Back) track | 1637 mm (64.45 in.) |
| Front overhang | 935 mm (36.81 in.) |
| Rear overhang | 962 mm (37.87 in.) |
| Drag coefficient (Cd) | 0.31 |
| Minimum turning circle (turning diameter) | 11.9 m (39.04 ft.) |
| Approach angle | 16.6° |
| Departure angle | 24.5° |
| Drivetrain Architecture | ICE and electric motor drive the front wheels |
| Drive wheel | Front wheel drive |
| Number of gears and type of gearbox | 7 gears, automatic transmission S tronic |
| Front suspension | Coil spring, Independent multi-link suspension, Transverse stabilizer, Air Suspension – Optional |
| Rear suspension | Independent multi-link spring suspension with stabilizer, Air Suspension – Optional |
| Front brakes | Ventilated discs, 338 mm |
| Rear brakes | Disc, 330 mm |
| Assisting systems | ABS (Anti-lock braking system) |
| Steering type | Steering rack and pinion |
| Power steering | Electric Steering |
| Tires size | 215/70 R17; 235/60 R18; 235/55 R19; 255/45 R20; 255/40 R21 |
| Wheel rims size | 7J x 17; 8J x 18; 8J x 19; 8J x 20; 8.5J x 21 |
The Audi Q5 III (GU) 2.0 TFSI Mild Hybrid, launched in September 2024, represents the latest iteration of Audi’s popular compact luxury SUV. Positioned as a mainstream offering within the Q5 range, this variant balances performance, efficiency, and technology, appealing to a broad customer base. It builds upon the foundation of the Q5 III (GU) generation, which utilizes the MLB Evo platform, shared with other Volkswagen Group vehicles. This specific configuration – the 2.0 TFSI engine paired with a mild hybrid system and the seven-speed S tronic dual-clutch transmission – aims to deliver a refined driving experience with reduced emissions.
Powertrain & Engine Architecture
At the heart of the Q5 III (GU) 2.0 TFSI Mild Hybrid lies the EA888 1.984-liter inline-four cylinder gasoline engine. This engine, often identified by engine codes such as DZG or similar depending on the specific market, features direct fuel injection and a single turbocharger with an intercooler. The turbocharger provides forced induction, boosting power and torque output. The engine utilizes a dual overhead camshaft (DOHC) valvetrain with four valves per cylinder, optimizing airflow for efficient combustion. The mild hybrid system incorporates a 48-volt electrical system and a belt-driven starter-generator. This system allows for extended start-stop functionality, regenerative braking to recapture energy, and a limited amount of electric assistance during acceleration. The seven-speed S tronic dual-clutch transmission delivers rapid and smooth gear changes, contributing to both performance and efficiency.
Driving Characteristics
The 204 horsepower and 340 Nm (250.77 lb-ft) of torque produced by this powertrain configuration provide adequate performance for everyday driving. Acceleration from 0-60 mph takes approximately 8.2 seconds, and the Q5 reaches a top speed of 226 km/h (140.43 mph). Compared to higher-output Q5 variants, such as those with the 2.0 TFSI producing 261 hp, this version offers a more relaxed driving experience. The S tronic transmission is well-tuned, providing quick shifts and a responsive feel. The mild hybrid system contributes to improved fuel economy, particularly in urban driving conditions. While not as sporty as the more powerful Q5 models, this variant provides a comfortable and refined ride quality.
Equipment & Trim Levels
The Q5 III (GU) 2.0 TFSI Mild Hybrid typically comes standard with a comprehensive suite of features, including Audi’s MMI touch response infotainment system with a 10.1-inch touchscreen display, Audi virtual cockpit, leather upholstery, three-zone automatic climate control, and a suite of advanced driver-assistance systems such as lane departure warning and forward collision warning. Optional extras include a panoramic sunroof, premium sound system, adaptive cruise control, and various interior trim upgrades. Trim levels may vary by market, but generally, this configuration represents a mid-range offering, positioned above the base models but below the higher-performance and luxury-focused trims.
Chassis & Braking
The Q5 III (GU) features a sophisticated chassis design with independent suspension on all four wheels. The front suspension utilizes a five-link configuration, while the rear employs a multi-link setup. Optional air suspension is available, providing adjustable ride height and enhanced comfort. The braking system consists of ventilated discs at the front and solid discs at the rear. Anti-lock braking system (ABS) and electronic stability control (ESC) are standard features, ensuring safe and controlled braking performance. The steering system is an electromechanical power steering system, providing precise and responsive steering feel.
Market Reception & Comparison
The Audi Q5 III (GU) 2.0 TFSI Mild Hybrid has been well-received by automotive critics, praised for its comfortable ride, refined interior, and efficient powertrain. Compared to other trims in the Q5 lineup, this variant offers a compelling balance of performance and fuel economy. The mild hybrid system contributes to lower emissions and improved fuel efficiency compared to the non-hybrid models. However, some reviewers have noted that the acceleration is not as brisk as that of the higher-output Q5 variants. Against competitors such as the BMW X3 and Mercedes-Benz GLC, the Q5 2.0 TFSI Mild Hybrid holds its own, offering a competitive package of features, performance, and luxury.
Legacy
The EA888 engine family, including the 1.984-liter variant used in the Q5 III (GU), has a reputation for reliability and durability. The mild hybrid system, while relatively new, is proving to be a reliable addition to the powertrain. In the used car market, the Q5 III (GU) 2.0 TFSI Mild Hybrid is expected to hold its value well, thanks to its strong brand reputation, comprehensive features, and efficient powertrain. Regular maintenance, including oil changes and adherence to the manufacturer’s recommended service intervals, will be crucial to ensuring the long-term reliability of this vehicle.




