1988-1990 Opel Corsa A (facelift ) 1.2i (45 Hp)

The Opel Corsa A 1.2i, produced from 1988 to 1990, represented the entry point into the first generation of the Corsa model line. This variant, powered by a modest 1.2-liter engine producing 45 horsepower, was a key component of Opel’s strategy to offer an affordable and economical supermini to European buyers. The Corsa A, internally designated as the 1HX0 series, was a significant departure from the aging Kadett, aiming to compete with popular rivals like the Peugeot 205, Renault 5, and Fiat Uno. The 1.2i model specifically targeted budget-conscious consumers and first-time car buyers, prioritizing fuel efficiency and low running costs over outright performance.

Technical Specifications

Brand Opel
Model Corsa
Generation Corsa A (facelift 1987)
Type (Engine) 1.2i (45 Hp)
Start of production 1988
End of production 1990
Powertrain Architecture Internal Combustion engine
Body type Hatchback
Seats 5
Doors 3-5
Fuel consumption (urban) 7.2 l/100 km (32.7 US mpg, 39.2 UK mpg, 13.9 km/l)
Fuel consumption (extra urban) 4.4 l/100 km (53.5 US mpg, 64.2 UK mpg, 22.7 km/l)
Fuel consumption (combined) 6.2 l/100 km (37.9 US mpg, 45.6 UK mpg, 16.1 km/l)
Fuel Type Petrol (Gasoline)
Acceleration 0 – 100 km/h 18 sec
Acceleration 0 – 62 mph 18 sec
Acceleration 0 – 60 mph 17.1 sec
Maximum speed 143 km/h (88.86 mph)
Weight-to-power ratio 16.4 kg/Hp, 60.8 Hp/tonne
Weight-to-torque ratio 9.3 kg/Nm, 108.1 Nm/tonne
Power 45 Hp @ 5000 rpm
Power per litre 37.6 Hp/l
Torque 80 Nm @ 2200-2600 rpm (59 lb.-ft. @ 2200-2600 rpm)
Engine layout Front, Transverse
Engine Model/Code C12NZ
Engine displacement 1196 cm3 (72.98 cu. in.)
Number of cylinders 4
Engine configuration Inline
Cylinder Bore 79 mm (3.11 in.)
Piston Stroke 61 mm (2.4 in.)
Compression ratio 7.8:1
Number of valves per cylinder 2
Fuel injection system Carburettor
Engine aspiration Naturally aspirated engine
Valvetrain OHV
Engine oil capacity 3 l (3.17 US qt | 2.64 UK qt)
Coolant 6.1 l (6.45 US qt | 5.37 UK qt)
Kerb Weight 740 kg (1631.42 lbs.)
Max. weight 1220 kg (2689.64 lbs.)
Max load 480 kg (1058.22 lbs.)
Trunk (boot) space – minimum 270 l (9.53 cu. ft.)
Trunk (boot) space – maximum 1060 l (37.43 cu. ft.)
Fuel tank capacity 42 l (11.1 US gal | 9.24 UK gal)
Length 3622 mm (142.6 in.)
Width 1532 mm (60.31 in.)
Height 1365 mm (53.74 in.)
Wheelbase 2343 mm (92.24 in.)
Front track 1320 mm (51.97 in.)
Rear (Back) track 1307 mm (51.46 in.)
Ride height (ground clearance) 140 mm (5.51 in.)
Drag coefficient (Cd) 0.36
Drivetrain Architecture The Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheel Front wheel drive
Number of gears and type of gearbox 4 gears, manual transmission
Front suspension Coil spring
Rear suspension Coil spring
Front brakes Disc
Rear brakes Drum
Steering type Steering rack and pinion
Tires size 165/70 R13
Wheel rims size 13

Powertrain & Engine Architecture

The Corsa A 1.2i was powered by the C12NZ engine, a 1.2-liter (1196 cc) inline-four cylinder unit. This engine featured a relatively simple overhead valve (OHV) valvetrain with two valves per cylinder. Fuel delivery was managed by a single carburetor, a cost-saving measure typical of entry-level models of the era. The engine produced 45 horsepower at 5000 rpm and 80 Nm (59 lb-ft) of torque between 2200 and 2600 rpm. The engine’s design prioritized reliability and fuel economy over performance. The transmission was a four-speed manual gearbox, chosen for its simplicity and affordability. This configuration was a common pairing in the European small car segment during the late 1980s and early 1990s.

Driving Characteristics

The Corsa A 1.2i offered modest performance. Acceleration from 0 to 100 km/h (0-62 mph) took approximately 18 seconds, and its top speed was around 143 km/h (88.86 mph). The four-speed gearbox, while adequate for everyday driving, meant that the engine often felt strained at higher speeds. Compared to the more powerful Corsa variants, such as those equipped with the 1.4 or 1.6-liter engines, the 1.2i lacked the punch needed for quick overtaking maneuvers or spirited driving. However, its light weight (740 kg / 1631 lbs) helped to mitigate the lack of power to some extent. The gear ratios were optimized for fuel efficiency rather than acceleration, resulting in a relaxed driving experience at cruising speeds.

Equipment & Trim Levels

The 1.2i Corsa A typically came with a basic level of equipment. Standard features generally included cloth upholstery, a simple dashboard layout, and manual windows and door locks. Power steering and central locking were usually optional extras. Interior trim was functional rather than luxurious, with durable plastics used throughout the cabin. The 3-door hatchback was the most common body style for this trim level, although a 5-door version was also available. Optional extras included a sunroof, upgraded stereo systems, and different wheel covers.

Chassis & Braking

The Corsa A featured a relatively simple chassis design. Front suspension utilized coil springs, while the rear suspension also employed coil springs. Braking was handled by disc brakes on the front wheels and drum brakes on the rear. The steering system was a rack and pinion setup, providing reasonably precise steering feel. The suspension was tuned for comfort rather than sporty handling, resulting in a compliant ride quality. The relatively narrow tires (165/70 R13) contributed to the car’s fuel efficiency but limited grip in cornering situations.

Market Reception & Comparison

The Corsa A 1.2i was generally well-received as an affordable and economical city car. Critics praised its fuel efficiency and low running costs, but noted its lack of performance. Compared to other trims in the Corsa lineup, such as the 1.4 or 1.6-liter models, the 1.2i offered significantly less power and refinement. However, it was also considerably cheaper to purchase and operate. Its main competitors, like the Peugeot 205 and Renault 5, offered similar levels of performance and economy, making the Corsa A a competitive option in the supermini segment.

Legacy

The Corsa A 1.2i, while not known for its performance, proved to be a reliable and durable vehicle. The C12NZ engine, despite its simple design, was generally robust and capable of high mileage with proper maintenance. Today, these cars are relatively rare and are often sought after by classic car enthusiasts and collectors. The 1.2i variant, in particular, represents a nostalgic reminder of a simpler era of automotive engineering, where affordability and practicality were prioritized over outright performance. Parts availability can be a challenge, but the Corsa A’s widespread popularity in Europe means that many components are still obtainable.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top